|
CC1200 CriticalTAP 100/1000 Breakout TAP Module |
|
|
|
ConneX™ TAP Modules
CC1200
.gif "CC1200") The CC1200 is part of the new generation of TAP products from Network Critical; it is a passive breakout TAP for 100/1000 network links, for connection to a dual-port network tool. The CC1200 features Network Critical’s innovative Zero-packet-loss failsafe technology which maintains full-duplex pass-through capability to protect your network link from downtime in the event of a product failure. The CC1200 features: - Breakout monitor ports, each of which carry one side of the network conversation. Breakout mode guarantees that 100% of the network traffic is presented to the network tool without delay, even at sustained line-rate operation.
- Passive operation; in addition to the link protection failsafe the CC1200 blocks all traffic coming back from the network tool.
- Link Failure Propagation (LFP) allows simultaneous failover of network interfaces, useful in HA network scenarios. This is a user-configurable option.
- 100/1000 network speeds: the network ports on the CC1200 are user-configurable to operate at either 100BASE-TX Fast Ethernet or 1000BASE-T Gigabit Ethernet. The monitor ports are Gigabit Ethernet.
 All the ConneX™ modules must be mounted into a ConneX™ Chassis, and are also available with the same features as stand-alone products in the ConneX™ Portable TAP range.
Supported Technologies
 | Passive – protects (isolates) the Live Network from receiving traffic back through the monitor ports. Allows network tools to be deployed in ‘stealth’ mode. |  | Fail-to-Safe – No point of failure – Input power voltage is continuously monitored; if the input voltage is outside nominal levels, then the Live Network Ports fail-closed, maintaining the network link. The proprietary fail-close circuitry is passive and requires no power. |  | Link Failure Propagation (LFP) – This feature monitors the link status of the Live Network Ports. In the event one of the connected network devices fails, then the TAP will immediately drop the other Live Network Port. This ensures your high availability (HA) design is not comprised. |  | A/B Breakout – breaks out the network traffic into two separate streams (Rx & Tx). |  | 100BASE-TX – supports 100BASE-TX Fast Ethernet on Live Network Ports. |  | 1000BASE-T – supports 1000BASE-T Gigabit Ethernet on Live Network Ports. |  | LinkLock – 100% Uptime Guaranteed – A permanent link connection between the two network devices enables Zero Packet Loss on the Live Network Ports while power is turned on or off. Packet Injection is NOT supported in this mode. This feature is not supported at 1000Base-T. |  | RoHS Compliant - Fully complies with EC directive 2002/95/EC. |  | Dual PSU - Features Dual Power Supplies for added resilience. |
 In BREAKOUT mode bi-directional live network traffic is broken-out onto separate monitor ports, giving a single network tool full access to the traffic. This type of deployment is recommended when 100% guaranteed traffic capture is required. |
Documentation
Pricing
For TAP pricing information, please click here to contact us, leave your contact details and area of interest and you will be contacted by a reseller in your area. Alternatively, call our sales team directly on +44 (0)1189 543210 (Europe) or 716-558-7280 (USA). We look forward to hearing from you! |
TAP Vendors 
